Adblue Pump

AdBlue Pump 1)Continuous working with low temperature 2)Max flow:30~50GPM 3)Pressure max: 40PSI 4)Check:Viton /EPDM

Adblue Pump

 

DC Urea /AdBlue pumps SPECIFICATION

PUMP Design:   5 chamber diaphragm

Motor Design:   Permanent magnet DC

Voltages:       12, 24VDC

Motor rating:     IP 54 (splash proof)

AMP Draw:     16 amps@25psi for 12 VDC; 8 amps@ 25psi for 24VDC

Fuse Size (A):   35 for 12 VDC;       24 for 24 VDC

Pump Body:     Glass filled Nylon

Diaphragm: TPV;    

Check valves: Viton /EPDM

Max. Flow Rate:   9.2GPM (35LPM)

Max. Pressure:   40PSI (2.75BAR)

Liquid Temp:     40°F (5°C)MIN;  

140°F (60°C)MAX

Duty cycle:     Continuous with self-ventilated

Weight:         12.22 LBS (5.5KG)

Certifications: CE

Port Size inlet/ outlet: 3/4” HB ST

DC Urea/Adblue Pump Techonical data:

Model	Liquid	Voltage	Fittings	Open Flow GPM (LPM)	Switch Max PSI (bar)	Diaphragm	Valves
HV-30A	Clean water	12V	3/4” HB ST	7.9-9.2 (30-35)	40 (2.75)	TPV	EPDM
HV-30B	Clean water	24V	3/4” HB ST	7.9-9.2 (30-35)	40 (2.75)	TPV	EPDM
HV-30A	Adblue	12V	3/4” HB ST	7.9-9.2 (30-35)	40 (2.75)	TPV	Viton
HV-30B	Adblue	24V	3/4” HB ST	7.9-9.2 (30-35)	40 (2.75)	TPV	Viton

 MOUNTING

  

The HV Series pumps are self-priming and may be located above or below the water supply in a dry location. To vertically mount these units, it is best to do so with the motor on top. This will prevent water dripping on the motor in the event of a leak. Place pump on a solid surface and secure with four mounting screws; be careful not to compress the rubber grommets, which act as vibration dampers.

Adblue Pump